Home>Products> Potentiometer Position Sensor > Magnetostrictive displacement sensor

Magnetostrictive Linear Position Sensors in Profile Design

The magnetostrictive linear displacement transducer generates a pulsed magnetic field by a pulse current emitted along a waveguide, and when the magnetic field intersects with a magnetic field generated by a moving magnet near the waveguide wire, a strain pulse is generated due to the magnetostrictive effect, or the waveguide is twisted.

Send Inquiry

Description

Magnetostrictive Linear Position Sensors In Profile Design

Product Introduction

The magnetostrictive displacement sensor is a high-precision measuring device based on the magnetostrictive principle. Utilizing a non-contact measurement method, it offers exceptional durability, robust environmental adaptability, and requires no periodic calibration or maintenance. Featuring absolute output, the sensor eliminates the need for zero reset upon restart. It is characterized by outstanding precision, stability, reliability, and repeatability. Supporting multiple output options-including current, voltage, SSI, and Modbus-it is widely employed in demanding industrial applications such as petroleum, chemicals, steel, ports, machinery, and food processing. As a top-tier solution for high-accuracy displacement control, it is the preferred choice for critical measurement tasks.

Technical parameter

	Analog output	Digital Output
Power supply	Default 24VDC (12V optional )
Measurement object	Can measure 1~2 locations	Can measure 1~3 positions
Displacement range	80~3000mm
Output signal	Voltage 0~5V or 0~10V	Modbus	SSI
	Current 0~20mA or 4~20mA
Load capacity	Voltage signal output minimum load ≥5KΩ	Can network 32 sensors	Point-to-point
	Current signal output maximum load resistance ≥600Ω
Linearity error	≤±0.05% F.S ( Min ±50μm)
Repeat error	≤±0.02% F.S
Resolution	Adopt 16bit D/A conversion, 0.0015% F.S	5μm
Update time	1ms (range ≤1000mm)/2ms(range≤3000mm)
Hysteresis	≤0.002%F.S
Operating temperature	-40°C~85°C
Temperature coefficient	≤0.007% F.S/°C

Features

● Electronic compartment is fully sealed with stainless steel, protection level IP65-67

● Current, voltage, SSI, Modbus multiple output modes

● Threaded or flange installation

● Non-contact measurement, zero maintenance

Dimension (mm)

dimension 02

Application

● Metallurgical industry: hard die casting, extrusion molding, cutting

● Port equipment: container handling

● Plastic industry: injection molding, blow molding, die casting

● Construction industry: tunnel drilling, bulldozers, excavators

20220914160003dc9d136a8d504a3994c6ce5c3001d516

Installation steps:

product-1600-610

1. First install the fixing clip (or hexagonal screw) on the sensor rail (or slide groove).

2. Then move the sensor to the machine and place it horizontally. Move the fixing clip to the pre-drilled installation hole on the machine, align it, calibrate the fit with the machine, and then tighten the screw.

3. When installing the phase magnet, if you choose a slider, the customer needs to equip the connecting rod by himself. If you choose an open magnetic ring, you can go to our company to choose a magnetic ring bracket for installation.

Note:
When the measuring range is within 500mm, install 2PCS fixing clips. For every additional 500mm, install one more fixing clip.
Example: When the measuring range is 1500mm, install 4PCS fixing clips.

Paper tube with carton

package 2

Parts List

11_

Type	Name	Quantity
Position sensor	Magnetic ring/slider	1
	special screw	4
	washer	1
	Non-magnetic conductive gasket	1
liquid level sensor	Float ball	1
	locking ring	1
	Hexagon socket screws	1