GB Magnetostrictive Displacement Transducer
Magnetostrictive transducer with wire magnetostrictive technology, bases on principle of pulse variation due to position variation.
magnetostrictive ring doesn't contact with the mental rod, sensing position by magnetic pulse, long term service life.
Features of Magnetostrictive Position Sensor:
Flanged electronic compartment, the installation height is only 34mm
All stainless steel shell, solid and reliable
Fully enclosed electronic warehouse, strong anti-interference ability
Non-contact measurement, never wear
Absolute output, no need to return to zero
Technical parameter
Analog output | SSI output | |
Measuring range | 50-5000mm | 50-5000mm |
output signal | 4～20mA,, 0～10Vdc, 0～5Vdc, | 24, 25, 26 bit binary or gray code |
Resolution | 16-bit D/A | 1/ 2/ 5/ 10/ 20/ 50/ 100um |
Nonlinearity | ＜±0.01%F.S.(Min.±50μm) | ＜±0.01%F.S.(Min.±50μm) |
Repeatability | ＜±0.001%F.S.(Min.±1μm) | <±0.001% F.S. (minimum ±1 digit) |
response frequency | related to range | related to range |
Operating Voltage | 24VDC (-15/+20%) | |
Operating temperature | - 40℃～+85℃ | |
Measuring rod pressure | 35MPa continuous/70MPa peak | |
Protection class | IP67 or IP68 | |
Installation method | Tighten the sealing flange Φ18h6, 6 threaded mounting holes | |
Operating temperature | -40～+85 ℃ | |
Storage temperature | -40～+85 ℃ | |
Structure and Materials
Electronic warehouse 304 stainless steel
Rod 304 stainless steel
mounting flange 304 stainless steel
outer pipe pressure 35MPa(continuous)/70MPa(peak)
Working Conditions
Magnet speed any
Ambient temperature -40℃~+85℃
Humidity/Dew Point humidity90%,no condensation
Temperature Coefficient <±0.007%F.S/℃
Electrical protection IP67 IP68-special customization
Dimension
Application
·Plastics machinery
·Fluid Power & Linear Actuators
·Hydraulics and Pneumatics
·Processing machines
·Cylinder displacement measurement
Installation
Package
Paper tube with carton ,which will be safe for long distance delivery .
FAQ
Q: Does this product can replace MTS same model ?
A: Yes , we can .
Q: Can you accept OEM service ?
A: Yes, we can put your company information and logo on our sensors.Q: Can I be your distributor?
A: Yes, we are looking for distributors in oversea market.Q: What is your lead time?
A: Normally 7-10days. For quantity above100pcs, need extra 3-5 working days.
