Magnetostrictive Ultrasonic Transducer

RSserial Magnetostrictive Linear Displacement Transducer

 

Technical Characteristics

• Here's a simplified and relatable explanation of the features you mentioned, with examples:

  1. Rugged and fully enclosed design
  - *What it means:* The device is built tough and sealed tightly, so dust, water, or rough handling won't damage it.

  2. Non-wear, non-contact measurement method
  - *What it means:* It measures things without touching them, so nothing wears out over time.

  3. Low power consumption design effectively reduces system heating
  - *What it means:* It uses very little energy, so it doesn't get hot.

  4. Absolute position output, not affected by power failure
  - *What it means:* Even if the power goes out, it remembers the exact position when power comes back.

  5. Adapt to harsh environment, IP68 protection level
  - *What it means:* It can handle extreme conditions like dust, dirt, and being underwater for long periods.

  6. Multiple interfaces are available: Analog, SSI, Modbus
  - *What it means:* It can connect to different types of systems, making it flexible for various uses.
   

Technical parameter 

Dimension 

Non-contact Design

 

The magnetic ring and measuring rod employ a contactless measurement principle, eliminating mechanical wear and acoustic noise during operation. This friction-free design minimizes component degradation, reduces maintenance requirements, and enhances long-term reliability.

Modular circuit

 

With its modularized internal circuitry, the electronic compartment enables easy servicing and offers broad adaptability for diverse system integrations.

Strong adaptability

 

The device operates reliably under extreme environmental conditions, including temperature extremes, humidity, vibration, mechanical shock, corrosive elements, and particulate contamination.

Principle structure diagram

Installation 

Cylinder Application Notes

Cylinder Installation - The pressure-resistant round tube housing sensor is usually installed inside the cylinder, and the installation thread specifications include: M18X1.5, M20X1.5, 3/4"-16UNF-3A. Before installation, you need to make sure that the cylinder has been processed according to the correct size given in the atlas.

Mechanical Installation - The sensor has no requirements for the installation position and direction, but it must be installed firmly and reliably. The position magnet is installed on the moving part to be measured and maintains an appropriate distance from the measuring rod
Position Magnet - To ensure the accuracy of the measurement, the mounting bracket of the position magnet must be made of non-magnetic materials, such as screws, magnetic isolation gaskets, etc.

How to select sensor range according to oil cylinder ?

When selecting sensor range for existing oil cylinder, ensure that the sensor range includes the oil cylinder piston rod stroke, that is, the sensor range 0 point is before the piston rod stroke begins, and the sensor range end point is after the piston rod stroke ends.

Application 

certificates

 

 

Official certification

Certificate 

Certificate 

Certificate 

Certificate 

Certificate