Magnetostrictive Linear Position Sensors For Industrial Hydraulics
* Robust stainless steel housing
* Exceptionally shock and vibration resistant
* Temperature range -40 to 85 °C
* High pressure rating up to 1000 bar
* Resolution up to 1 μm
* Measurement length up to 7620 mm
* Non-contact design, therefore no wear and tear – no downtime
* Compaction head for installation in confined spaces
Technical parameters
|
Analog output |
SSI output |
|
|
Measuring range |
50-5000mm |
50-5000mm |
|
output signal |
4～20mA,, 0～10Vdc, 0～5Vdc, |
24, 25, 26 bit binary or gray code |
|
Resolution |
16-bit D/A |
1/ 2/ 5/ 10/ 20/ 50/ 100um |
|
Nonlinearity |
＜±0.01%F.S.(Min.±50μm) |
＜±0.01%F.S.(Min.±50μm) |
|
Repeatability |
＜±0.001%F.S.(Min.±1μm) |
<±0.001% F.S. (minimum ±1 digit) |
|
response frequency |
related to range |
related to range |
|
Operating Voltage |
24VDC (-15/+20%) |
|
|
Operating temperature |
- 40℃～+85℃ |
|
|
Measuring rod pressure |
35MPa continuous/70MPa peak |
|
|
Protection class |
IP67 or IP68 |
|
|
Installation method |
Tighten the sealing flange Φ18h6, 6 threaded mounting holes |
|
|
Operating temperature |
-40～+85 ℃ |
|
|
Storage temperature |
-40～+85 ℃ |
|
Dimension (mm)
Hydraulic installation diagram
A rod-shaped bushing (such as Teflon) is used to prevent friction between the magnet and the sensor rod. The orifice in
the piston rod depends on factors such as hydraulic pressure and speed. The orifice diameter cannot be less than 13 mm.
The peak pressure cannot exceed 70 MPa.
Honor and qualification
Official certification, professional after sales service.
Certificate
Certificate
Certificate
Certificate
Certificate
Workshop
FAQ
Q: what is the lead time ?
A: Normally the lead time is about 7 working days.
Q: Can you customize ?
A: No, the dimension should be our standard . But we can suggest you to choose the right one.
Q: How can you arrange delivery ?
A: For small quantity , we can send by air express ,such as DHL, UPS, Fedex . For big quantity , we can arrange delivery by sea cargo .
Q: About samples:
A: Yes, we have stock for samples.
Q: About guarantee:
A: 12 months
Q: What information do you need to choose the right dynamic torque sensor ?
A: Please provide the working range , output signal , thread size .
