BRG-62500 Torque And Angle Sensor
A torque-angle sensor is a sensor that can simultaneously measure both the torque (rotational moment) and the rotational angle of a mechanical component. Torque sensors incorporate an encoder with angle measurement. They convert the torque acting on a mechanical shaft into an electrical signal through a physical change (such as torsional deformation of the shaft) and simultaneously measure the shaft's rotational angle, providing information on the torque magnitude and rotational position.
1. Non-contact
2. Measuring range 0.1-5 Nm
3. Output 10 ± 5 kHz, 4-20 mA, ± 5 VDC, ± 10 VDC, RS485/232
4. Stainless steel shaft
5. Maximum speed 15,000 RPM
6. Speed output available
7. Built-in encoder
8. Display of torque, speed, and power available
Technical Parameters
|
Range |
0.1,0.2,0.5,1,2,3,5Nm |
|
Accuracy |
±0.1,±0.2%FS |
|
Zero Temperature Effect |
±0.02%FS |
|
Span Temperature Effect |
±0.02%FS |
|
Compensated Temperature Range |
-10～60ºC |
|
Operating Temperature Range |
-20～75ºC |
|
Torque Output |
10±5kHz ,4-20mA, ±5VDC,±10VDC, RS485, RS232,CAN, |
|
Supply Voltage |
12-24VDC |
|
Supply Current |
Less than 100mA |
|
Electrical Connections |
8-Pin |
|
Overload Protection |
200%FS |
|
Material |
Shaft material 17-4PH stainless steel, housing is aluminum |
|
Speed Measurement |
Maximum speed: 15,000 RPM, 60/30 pulse, 4-20mA, 5V/TTL, ±5VDC, ±10VDC, RS485, RS232, CAN Built-in encoder output signal is the same as the speed, which can be customized |
Drawing (mm)
