R serial Magnetostrictive Linear Position Sensors
Features :
• Non-contact measurement, never wear
• Absolute position output without zeroing
• Nonlinearity, ±0.01%F.S of full scale
• Repeatability, ±0.001%F.S of full scale
• Easy to diagnose, LED lights show real-time status
• Modular design for easy replacement
Technical parameter
Optional interface | analog | SSI | Start/stop |
Output signal | 4～20mA,； 0～10V ect | 24, 25, 26 bit binary or gray code | Pulse signal |
Optional interface | Modbus | Profibus-DP | CAN bus |
Output signal | RTU signal, standard EIA-RS485/RS422 | DP protocol | CANopen,CANbasic |
Measuring range | 50~5000mm | ||
Performance | Non-linearity < ±0.01%F.S. (minimum ±50μm), repeatability < ±0.001%F.S. (minimum ±1μm) | ||
Operating Voltage | 24VDC (-15/+20%) overvoltage protection, reverse polarity protection | ||
Working current | <60mA (varies with the range) | ||
Installation method | Cylinder built-in installation, M18*1.5, M20*1.5, 3/4-16UNF or customized | ||
Protection class | IP67 or IP68 | ||
Operating temperature | - 40℃～+85℃ | ||
Stem material | Stainless steel 304, 316 | ||
Measuring rod pressure | 35MPa continuous/70MPa peak | ||
Dimension
Installation
Part list
Type | Name | Quantity |
Position sensor | Magnetic ring/slider | 1 |
special screw | 4 | |
washer | 1 | |
Non-magnetic conductive gasket | 1 | |
liquid level sensor | Float ball | 1 |
locking ring | 1 | |
Hexagon socket screws | 1 |
Application
Metallurgical rolling mill
Water gate control
wind power
Injection molding machine
Rubber machinery
Hydraulic cylinder servo control
Gas station
oil depot
Pharmaceutical, Food Reactor
Coking
filling machine
chemical reaction tank
Package
Paper tube with carton
Workshop
FAQ
