Draw-Wire Displacement Sensor for Large-Range Measurement
A draw-wire displacement sensor is designed for large-range linear displacement measurement. It is also known as a draw-wire sensor, cable-extension sensor, string potentiometer, or cable-extension displacement sensor.
The sensor measures movement by connecting a measuring cable to a moving component. As the cable extends or retracts, an internal drum rotates, and a potentiometer or encoder converts this rotation into a position signal. The main advantage of a draw-wire displacement sensor is its compact housing combined with a large measuring range, allowing it to measure movement over several meters or even tens of meters.
However, a large measuring range does not automatically mean high accuracy, and a long installation distance does not necessarily mean that the actual displacement is large. Understanding the measurement principle, performance specifications, installation conditions, and system integration requirements is essential for selecting the right sensor.

1. How Does a Draw-Wire Displacement Sensor Work?
1.1 Basic Structure of a Draw-Wire Sensor
A typical draw-wire displacement sensor consists of the following components:
Measuring cable: Connects the sensor to the moving component.
Drum: Winds and unwinds the measuring cable.
Return spring mechanism: Provides tension to retract the cable as the moving component returns.
Rotary measuring element: A potentiometer, incremental encoder, or absolute encoder measures the drum rotation.
Housing and mechanical accessories: Include bearings, cable guides, and cable attachment components.
The measurement process follows this sequence:
Linear movement → Cable extension or retraction → Drum rotation → Electrical signal → PLC or data acquisition system
This is a contact-based measurement method. Although the sensor housing does not need to touch the moving surface, the measuring cable must be mechanically connected to the object being measured.
1.2 Relationship Between Displacement and Rotation
Under ideal conditions, when the effective winding radius remains constant, the relationship between cable displacement and drum rotation can be expressed as:
x=rθ
Where:
- x is the change in cable extension length.
- r is the effective radius of the drum.
- θ is the drum rotation angle in radians.
This equation describes the ideal conversion of linear movement into rotary movement.
In actual products, the winding structure, transmission mechanism, and measuring element jointly determine the relationship between cable length and output signal. Therefore, the calibration factor should not be calculated from the drum's external diameter alone. The manufacturer's displacement ratio or complete sensor calibration data should be used.
The return spring provides cable tension, but this does not mean that the tension remains constant throughout the entire measuring range. Manufacturers may specify maximum pull-out force and minimum retraction force separately, and the difference can be significant for some models.
2. Why Choose a Long-Range Displacement Sensor?
2.1 Compact Housing with a Large Measuring Range
A major advantage of a long-range displacement sensor based on draw-wire technology is that the measuring mechanism remains inside a compact housing while the cable extends over a long distance.
This makes the technology suitable for equipment that requires a long measuring range but has limited space for installing the sensor body.
2.2 Convenient Installation for Existing Equipment
A draw-wire sensor can often be installed by mounting the housing on a fixed frame and attaching the cable to the moving component.
This arrangement may avoid the need to redesign an entire measuring rail. However, the installation must provide a suitable cable path without abrasion, cable pinching, or interference with moving parts.
2.3 Industrial Applications of Draw-Wire Displacement Sensors
Draw-wire sensors are used in a variety of industrial applications. Different applications require different sensor series and specifications.
| Application | Measurement target | Key considerations |
|---|---|---|
| Telescopic booms and telescopic loaders | Boom extension length | Long travel, outdoor conditions, cable routing |
| Scissor lifts | Platform lifting position | Measuring point and mechanism geometry |
| Forklifts and automated material-handling equipment | Lifting height | Installation space and motion cycles |
| Synchronized lifting systems | Position of individual lifting points | Multiple sensors, data acquisition, and position differences |
| Test benches and road testing | Suspension or mechanism displacement | Dynamic performance and sampling requirements |
However, different applications correspond to different product series, and one model should not be assumed suitable for every application.
3. Key Specifications for Selecting a Draw-Wire Sensor
Selecting a draw-wire displacement measurement sensor requires more than checking whether the nominal measuring range covers the equipment's travel.
3.1 Measuring Range: Calculate the Actual Cable Extension
The required measuring range must cover the maximum cable extension under the actual installation conditions.
For example, suppose a machine has a travel distance of 8 m, but the cable is already extended by 2 m at the starting position.
The required maximum cable extension is:

In this case, selecting an 8 m sensor simply because the machine travel is 8 m would be insufficient.
This is an illustrative calculation. Actual selection must also consider the manufacturer's measurement starting point, minimum permitted cable extension, maximum working length, installation tolerances, and the additional margin required for unexpected movement.
The measuring range should cover the complete movement range under real installation conditions.
It is also important not to select an unnecessarily large measuring range. When accuracy is specified as a percentage of full scale, a larger measuring range results in a larger absolute error for the same percentage.
3.2 Linearity: Convert the Percentage into Millimeters
Linearity is a critical specification for a long-range draw-wire sensor.
Suppose a sensor has a measuring range of 10 m and a specified linearity of ±0.1% of full scale.
The corresponding linearity deviation is:

This means a linearity deviation of approximately ±10 mm, not ±0.1 mm.
The actual linearity specification can vary significantly between sensor models. Therefore, the specified percentage should always be converted into an absolute displacement value before deciding whether the sensor meets the application's accuracy requirements.
3.3 Resolution, Repeatability, and Accuracy
Resolution, repeatability, and linearity describe different aspects of sensor performance.
Resolution: The smallest change in output that can be distinguished.
Repeatability: The consistency of readings when the sensor returns to the same position multiple times.
Linearity: The deviation of the output relationship from an ideal straight line.
Installed measurement error: The combined effect of mechanical routing, temperature, signal acquisition, calibration, and other factors.
For example, the 10 m P115 encoder model listed in the product catalog provides an absolute output resolution of 0.038 mm, while its specified linearity is ±1 mm.
The ability to output values in increments as small as 0.038 mm does not mean that the actual measurement error is only 0.038 mm.
Similarly, when a potentiometric sensor is described as having virtually infinite resolution, this refers to its ideal continuous output characteristics. It does not mean that a PLC can obtain infinite measurement precision, because the acquisition system has its own limitations.
3.4 Dynamic Performance: Consider the Mechanical Limits
For applications involving rapid movement or frequent direction changes, the mechanical performance of the draw-wire mechanism is as important as the electronic output speed.
The return spring must retract the cable quickly enough when the moving component returns. Therefore, the selection process should evaluate the mechanical dynamic capabilities rather than focusing only on the signal refresh rate.
For example, the maximum cable acceleration of the P115 encoder model varies with the measuring range:
- 5 m model: approximately 5 g.
- 10 m model: approximately 3 g.
- 15 m model: approximately 3 g.
The dynamic capability of a short-range model should not automatically be applied to a longer-range model.
Before selecting a sensor, confirm the following specifications with the manufacturer:
Maximum cable extension and retraction speeds.
Maximum acceleration and rapid direction-change conditions.
Permitted operating cycle frequency and expected service life.
Output update interval and data acquisition bandwidth.

4. What Causes Measurement Errors During Long-Range Installation?
A cable-extension displacement sensor measures the change in cable path length. Its actual measurement performance depends on the relationship between the cable path, the moving object, and the installation environment.
4.1 Misalignment Between the Cable and the Measurement Direction
The sensor directly measures changes in cable length. If the fixed mounting point and the moving axis have a lateral offset, the cable length may not change in a one-to-one relationship with the axial position.
To reduce measurement errors:
Align the cable as closely as possible with the direction of movement when direct axial displacement measurement is required.
Establish a geometric conversion relationship if the cable angle changes significantly during movement.
Carefully define the measuring point when working with scissor mechanisms, rotating arms, and similar structures.
It is also important to distinguish between measurement-axis alignment and the permitted cable exit angle. The former affects the geometric relationship between cable length and displacement, while the latter affects friction and mechanical service life.
4.2 Cable Sag and Vibration Over Long Horizontal Distances
For a long horizontal cable span, the cable may sag rather than follow an ideal straight line.
When the cable path changes shape, the sensor output may reflect both the target movement and changes in the cable path. Therefore, the measurement cannot always be treated as the straight-line distance between two endpoints.
Long horizontal installations should consider:
Cable weight and tension.
Wind, equipment vibration, and rapid movement.
Whether manufacturer-approved guides or redirecting structures are required.
Whether support structures introduce friction or additional changes in cable routing.
Some draw-wire systems permit the use of redirecting pulleys. However, this does not mean that an ordinary pulley or sharp edge can be used without restrictions. The pulley structure and arrangement should be confirmed with the manufacturer.
4.3 Cable Tension and Its Effect on the Moving Object
The measuring cable applies a pulling force to the object being measured.
For example, the 10 m P115 encoder model has a maximum pull-out force of approximately 21 N and a minimum retraction force of approximately 8 N.
These forces may be relatively small for a large lifting platform. However, they may affect flexible supports, small test specimens, or lightweight mechanisms.
The cable force and its effect on the measuring object should therefore be evaluated during sensor selection.
4.4 Temperature, Contamination, and Environmental Conditions
Environmental suitability is another important consideration when choosing a long-range displacement sensor.
Check the following parameters:
Operating temperature.
Housing and connector protection ratings.
Measuring cable material and surface coating.
Exposure to rain, dust, oil, corrosion, and ice.
Shock and vibration conditions.
Different sensor series have different specifications. For example, some OEM models in the product catalog are rated IP20, industrial models may be rated IP65, and the K100 series is specified as IP67/IP69K with an operating temperature range of −40 to +85°C.
These specifications should not be generalized to every draw-wire sensor. The actual model and configuration must be checked before installation.
5. Output Options and PLC Integration
A linear displacement measurement sensor using draw-wire technology can provide different output options, depending on the product series.
These may include potentiometric, voltage, current, incremental encoder, absolute encoder, and fieldbus interfaces. Specific product series may support SSI, CANopen, PROFINET, EtherCAT, or EtherNet/IP.
| Output type | Key integration requirements |
|---|---|
| Potentiometer | Excitation voltage, input impedance, wiring, and acquisition method |
| Voltage output | Output range, signal reference ground, and analog input compatibility |
| Current output | Output range, loop wiring, permitted load, and input module configuration |
| Incremental encoder | HTL/TTL signal levels, counting mode, scaling factor, and position reference strategy |
| Absolute encoder or fieldbus | Interface protocol, position encoding, scaling, update interval, and power-loss recovery behavior |
Compatibility must be confirmed against the specifications of the actual sensor and control system. The fact that two devices both provide digital signals does not automatically mean that they are compatible.
4–20 mA Displacement Conversion Example
Suppose a specific sensor model is configured as follows:
4 mA corresponds to 0 m.
20 mA corresponds to 10 m.
Under these conditions, the measured position can be calculated as:

Where I is the measured current in milliamperes and x is the corresponding cable extension length in meters.
This is an example based on the specified endpoints, not a universal output range for all draw-wire sensors.
It is also necessary to distinguish between the absolute cable extension and the movement measured from the equipment's starting position. If the cable is already extended by 2 m at the starting position, the software can define that position as the process zero point. Mechanically, however, the initial 2 m still occupies part of the sensor's measuring range.
6. Installation and Commissioning Procedure
The installation process should follow the sensor's measuring range, mounting requirements, dynamic performance, and environmental specifications.
Step 1: Define the Measurement Objective
Determine whether the application requires axial position, the relative distance between two points, or a calculated value such as platform height or boom length.
Step 2: Calculate the Complete Cable Extension Range
Calculate the minimum and maximum cable extension lengths. Check the end positions, installation tolerances, and available measuring range.
Step 3: Check the Cable Path
Prevent interference with moving components, sharp edges, cable carriers, and personnel working areas. If a pulley or guide is required, first confirm that the manufacturer permits the proposed structure.
Step 4: Verify the Mechanical Connections
Ensure that the mounting bracket and cable attachment point are sufficiently stable and can withstand the cable tension specified for the selected model.
Step 5: Test at Low Speed
Operate the equipment at low speed first. Check for lateral pulling, friction, cable slack, and improper retraction before gradually testing the required operating speed and acceleration.
Step 6: Perform Bidirectional Position Verification
Measure readings at multiple known positions while approaching each position from both the extension and retraction directions.
This helps identify scaling errors, nonlinearity, and direction-dependent deviations.
Step 7: Provide Independent Mechanical Protection
The measuring cable should not be used as a machine limit cable or load-bearing cable.
For equipment involving personnel safety, the safety functions must be evaluated separately according to the equipment's risk assessment. An ordinary position output should not automatically be considered a safety-certified function.
These steps are engineering recommendations based on the sensor's measurement structure. The final installation, operation, and safety requirements should follow the instructions for the specific model and the equipment risk assessment.
7. Is a Draw-Wire Sensor Suitable for a 10 m Measurement Application?
Consider an application with the following requirements:
Travel distance: 10 m.
Application: Position monitoring of lifting equipment.
Permitted error: ±2 mm.
PLC interface: To be determined.
Environment: Outdoor exposure to dust and rain.
The suitability of a draw-wire displacement sensor can be evaluated in four steps.
Step 1: Is the Measuring Range Sufficient?
If the cable is already extended at the starting position, a 10 m movement distance may require a rated measuring range greater than 10 m.
The sensor should be selected according to the maximum actual cable extension, not just the equipment's nominal travel distance.
Step 2: Can the Sensor Accuracy Meet the Requirement?
The previously mentioned 10 m analog-output model has a specified linearity of ±15 mm. This specification alone is insufficient for an application requiring ±2 mm.
The 10 m encoder model has a specified linearity of ±1 mm, providing a basis for further evaluation. However, installation, temperature, signal acquisition, and calibration errors must also be considered.
A linearity specification of ±1 mm does not, by itself, guarantee that the complete installed system will achieve ±2 mm accuracy.
Step 3: Is the Mechanical Performance Suitable?
The maximum operating speed, acceleration, and frequency of direction changes must be established and checked against the cable extension and retraction capabilities.
Step 4: Can the Installation Environment and Cable Path Be Controlled?
Confirm the actual protection rating, cable exit direction, exposed cable path, and risks associated with icing, contamination, and abrasion.
The final decision should be based on the combined performance of the sensor, its mechanical installation, the output interface, and the complete measurement system.
8. Measuring Small Displacement Over a Long Installation Distance
A long installation distance does not necessarily mean that the application requires large-range movement measurement.
For example, if the sensor is installed 20 m from the measurement point but the point moves by only 5 mm, the application involves small displacement measurement over a long baseline.
In this situation, the following factors must be considered:
Actual resolution and repeatability of the large-range sensor.
Changes in the cable path and temperature.
Stability of the fixed reference point.
Movement of the target in other directions.
Whether the total system error is sufficiently small to identify a 5 mm change.
Specifications from different draw-wire sensor models demonstrate that measuring range, resolution, and linearity can vary significantly.
A measuring range that covers 20 m does not automatically mean that the sensor can reliably detect millimeter-level changes under actual installation conditions.
Conclusion
A draw-wire displacement sensor is a practical solution for measuring long linear travel when installation space is limited and the measuring cable can be routed appropriately. Its compact housing, flexible installation, and multiple output options make it suitable for applications such as telescopic booms, lifting platforms, forklifts, synchronized lifting systems, and test equipment.
However, selecting a long-range draw-wire sensor requires evaluating the complete measurement system, not just the nominal measuring range. Cable extension, linearity, resolution, repeatability, dynamic performance, cable tension, installation geometry, environmental protection, and PLC compatibility all affect the final measurement result.
For demanding applications, the sensor should be evaluated against the actual operating conditions and required system accuracy before a model is selected.
FAQ
1. What is a draw-wire displacement sensor?
A draw-wire displacement sensor is a device that measures linear movement by converting the extension and retraction of a measuring cable into a rotary movement and then into an electrical position signal. Depending on the model, the rotary measuring element may be a potentiometer, incremental encoder, or absolute encoder.
2. What is the difference between a draw-wire sensor and a linear displacement sensor?
A draw-wire sensor is a type of linear displacement sensor. It measures movement through cable extension and retraction, making it suitable for applications requiring a long measuring range and a compact sensor body. Other linear displacement sensing technologies use different measurement principles and may be more suitable for specific installation or precision requirements.
3. How do I select the measuring range of a draw-wire sensor?
Calculate the maximum actual cable extension over the complete movement range. If the cable is already extended at the starting position, that initial extension must be included in the calculation. Also consider the manufacturer's specified minimum and maximum working lengths, installation tolerances, and the additional margin required for unexpected movement.
4. Does a larger measuring range mean lower accuracy?
Not necessarily, because accuracy depends on the specific sensor model and its performance specifications. However, when linearity is expressed as a percentage of full scale, a larger measuring range produces a larger absolute deviation for the same percentage. Always convert the specified linearity into millimeters before evaluating the application.
5. What is the difference between resolution and linearity in a draw-wire displacement sensor?
Resolution describes the smallest distinguishable output change, while linearity describes the deviation from an ideal straight-line relationship. A sensor can provide fine output resolution while still having a larger linearity deviation. Neither specification alone represents the total installed measurement error.
6. Can a draw-wire displacement sensor measure fast-moving objects?
It depends on the sensor model and the operating conditions. The maximum cable extension speed, retraction speed, acceleration, direction-change frequency, and expected service life should be checked. Electronic output speed alone does not establish whether the mechanical cable and return spring can follow the movement reliably.
7. Can a draw-wire displacement sensor be connected to a PLC?
Yes, provided that the sensor output is compatible with the PLC input. Depending on the model, outputs may include potentiometric, voltage, current, incremental encoder, absolute encoder, or industrial communication interfaces. The signal range, wiring, protocol, scaling, and update interval must be confirmed before integration.
8. What should be considered when installing a draw-wire sensor outdoors?
Check the sensor's actual housing and connector protection ratings, operating temperature range, cable material, and exposure to rain, dust, oil, corrosion, and ice. The cable path should also be checked for lateral pulling, abrasion, sag, vibration, and interference with moving components.
9. Can a draw-wire sensor measure a small displacement over a long distance?
It may be suitable, but the application requires careful evaluation. A long measuring range does not guarantee the ability to detect small changes accurately. Resolution, repeatability, linearity, cable-path stability, temperature effects, reference-point stability, and total system error must all be considered.
10. How can measurement errors be reduced when using a draw-wire displacement sensor?
Align the cable with the intended measurement direction where possible, verify the complete cable extension range, avoid cable interference and excessive lateral pulling, and confirm that the installation is within the model's mechanical and environmental limits. During commissioning, verify multiple known positions in both extension and retraction directions to identify scaling errors and direction-dependent deviations.






